Braze-On
If you are a 1X CX, gravel or road rider and can't afford to drop a chain, the Wolf Tooth GnarWolf™ braze-on chainguide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddies of conditions. No other CX chainguide is as rigid or as easy to adjust as the GnarWolf!
- Patented infinite chainline adjustment between 45mm and 51mm via an elliptical expanding mandrel. There are no shims required!
- Infinite vertical adjustment between 34t and 46t for round and oval chainrings
- Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
- Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
- All adjustments made with common 4 mm hex key
- Designed for the rigors of the muddiest CX course or roughest gravel riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g
- Specific guide shaping is optimized for use with elliptical/oval and round chainrings
- Installation takes just a few minutes – no need to remove your crank arms
Tech Specs
Weight: Braze-On 44g
Material: 6061-T6 with stainless steel hardware
Made in the USA
Compatibility
- Designed to fit on any bike with an integral braze-on mount. If you have a round seat tube with no braze-on mount, you can buy a braze-on adapter
- Designed to accommodate chainlines from approx. 45mm to 51mm
- Minimum distance of 10 mm between crank and center of ring
- See photos above as installation guide
- Optimized for use with both elliptical and round 34t-46t chainrings
- For 1x use only
Note: Braze-on mount is not at the same height on all bikes so max chainring size will vary somewhat depending on frame brand and model
ISCG05
If you are a rider that fearlessly takes the tough lines and can't afford to drop a chain, the Wolf Tooth GnarWolf™ chainguide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddies of conditions. Refer to image on this page for installation and adjustment instructions.
- Patented infinite chainline adjustment between 48mm and 54mm via an elliptical expanding mandrel. There are no shims required!
- Infinite vertical adjustment between 28t and 36t for round chainrings and 28t-34t elliptical
- Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
- All adjustments made with common 4mm hex key
- Designed for the rigors of Enduro, heavy trail, mud and even DH riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g
- Specific guide shaping is optimized for use with elliptical and round chainrings
- Installation takes just a few minutes – no need to remove your crank arms
Tech Specs
Weight: ISCG05 44g
Material: 6061-T6 with stainless steel hardware
Made in the USA
Compatibility
- Designed to fit on any bike with an ISCG 05 Mount
- Installation shown in photos on this page
- Optimized for use with both elliptical and round chainrings
- Round chainrings 28t-36t or elliptical chainrings 28t-34t
- For 1x use only
- Minimum distance of 10 mm between crank and center of ring
- Due to frame and bike geometry there will be some bikes that need modifications or flat out won't work. Here are the known exceptions:
- Ibis Mojo 3 - will not work
- Ibis Ripmo - will not work
- Specialized Stumpjumper 2016-2017 models require 1 mm of spacers (washers will work) between the frames ISCG05 mounts and the guide (the guide interferes with the frame otherwise).
- Evil The Following - will not work (upper swing arm interferes)